How many times have you been working around your home, or at a pal’s house, and need to find somewhere on the wall to hammer a nail to hang a painting. And just when you think you find the stud to hammer the nail – you wind up making a hole into the wall and making a mess. You may need to think about Walabot, among the first smart stud finders to hit the marketplace. Wall Density Scanner
Walabot is made by Vayyar Imaging, a 3D imaging sensor company that provides consumers with a way to see through objects, liquids and materials. The company chose to take advantage of its technology to develop Walabot and offer DIYers a chance to get a better look behind walls than the present stud finders you find on the marketplace.
The gadget is the exact same size as a mobile phone and simply connects to it through a magnet supplied in the box, and put on the back of your Android phone. Note that Walabot just works with Android phones. If you have an iOS phone, you are going to have to wait. The company told the public that the iOS version is on their roadmap. If you do not want to wait, there is an alternative for you: borrow a buddy’s Android phone to use the gadget. Otherwise, go to Walabot’s website, and enter your email address to get informed when the iOS app launches.
Wall Density Scanner
What Is Walabot? Wall Density Scanner
It is a gadget that connects to your Android phone and sends out a picture of what it detects behind your walls. On your phone screen, you see pictures of wires, studs, pipes – even bugs! Think of an in-wall imaging mobile app, and you basically get the idea. Wall Density Scanner
The unit is about the size of a cell phone, although it is quite thicker. One side of it has a magnet to connect to your phone, and the opposite is flat and smooth. The flat side is the one you will utilize to run the device throughout your walls while you watch your phone screen to see what shows up. The flat side should be held to the wall straight, not at an angle, so you can see what you want to.
What’s in the box: It comes with a DIY sensor, a USB cable, a magnetic disc, a protective sheet, and a manual.
The manual will teach you how to see through walls and analyze the images you see. It is quite comprehensive, so it would not be hard to get started using the Walobot with a couple of minutes of its arrival. Wall Density Scanner
If you are thinking this seems like magic, we are here to tell you it is science. Oh, and if in case you were thinking people could utilize it to check out your house from the street, it’s not made for that. It is for people who are DIYers or professional carpenters.
What are other things can you do with a Walabot?
The Walabot can find circuitry, pipes, and whatever you would anticipate to find behind your walls. Utilizing the device, you can:
- Look for leaks.
- Look for structural damages.
- Look for broken pipes.
- Detect rats and other animals. The Walabot can identify motion behind walls, helping you locate rodents and nests.
How does the Walabot DIY work?
When you get your Walabot DIY, you would have to download the Android application for it and then make an account. Attach the Walabot DIY to your smart device and you are set to calibrate the Walabot DIY.
Do not stress, calibrating the gadget is extremely easy and if you have utilized an analog stud finder before, you would find the procedure really similar.
The images it offers you are very accurate, and you would know if it is a pipe that the Walabot DIY is seeing or electrical wires, or something else.
This is just perfect for those who are thinking about remodeling their homes, or those who enjoy DIY jobs. This also comes in very useful for those who have an interest in architecture and building.
The makers obviously thought in two unique classifications when developing this device. The DIY model is for the person doing periodic repair work and little jobs around the house.
What does it offer? Wall Density Scanner
It includes a variety of basic features. You can use it as described above to see wires, pipes, studs (both wood and metal) and even bugs and rodents.
These views work for both wood and concrete on this model.
This model likewise lets you adjust the depth of field so that you can see four inches deep if you wish to. You can alter it to use less depth.
The images on the screen are good, and they are shown in color. You can likewise scan throughout your wall and get a graphic representation of the objects, with a sign of how far apart they are. This is beneficial for planning a task that includes the whole wall.
One feature permits you to take a picture of a location you are scanning, so you can place the image on a computer and look at it more closely. This makes it easier to sit at your desk and make plans while viewing the image.
This is a good standard device for property owners and other do-it-yourselfers. You will not miss out on the more advanced features if you plan to do light-duty repairs and refurnishing around the house. It will definitely identify studs for you, so when you hang heavy pictures or mirrors, you will have a strong landing location for your screws or nails.
The professional models are available in three variations. Let’s take a look at what they provide you.
Each model contains all the features of its predecessor. This model supplies generally the very same images that the DIY does, though they are a tad bit clearer with the Starter.
It can’t just spot items behind walls, it can find breathing. That is pretty unusual. This makes it useful for anyone who wants to monitor an older individual they are looking after. If you think you may have sleep apnea, it might inform you how often you stop inhaling throughout the night. Going from driving nails to viewing breathing is a big leap, however perhaps the maker thought, “Why not? We have the technology. Might as well utilize it.”
The unit works as a movement detector too. Not only is this proper for pests behind walls, but it is also good for keeping an eye on spaces and patios where people or animals shouldn’t be.
It has three antennas, making it a lot more sensitive than the basic model.
With this model, you have stepped up into some advanced| features, in addition to better imaging than the DIY variation. Bear in mind that it has all the features of the DIY and they have improved sharpness and accuracy. With Starter, you have dipped your toe into the waters of professionalism.
What makes this model unique from the predecessors?
This model consists of all the features of the Starter model but has better spatial sensors. This is due to the fact that it can track in 3D, providing you a much fuller view of spaces and objects. If you were sawing out a square of drywall or attempting to break through concrete in a particular area, you would require to understand far more than where studs are. It has fifteen antennas, suggesting it does not miss much.
This model puts you squarely in the professional ranks. It is more able than the lower models to capture hard-to-see threats and objects and to reveal them to your plainly.
Look this one over carefully. It could have all the features you need on an average day. It is, obviously, cheaper than the next model, and the imaging is excellent. There is no need to pay for features you will never utilize, so compare carefully.
What’s the most powerful unit? Wall Density Scanner
This has all the features we have taken a look at up until now. Except they work far better on this model. So the imaging, spatial recognition, movement detection and even the breath detector are more sensitive and finely tuned.
This unit has eighteen antennas, which offers it with the broadest range of frequencies. It has high-resolution 3D imaging and can provide raw signal data. This is the best view behind your walls you are going to get without taking down drywall.
You are going to see precisely what is behind walls, whether drywall or concrete. This imaging is much clearer than the other models, and the 3D capabilities end the uncertainty. It is not difficult to think of a professional using this for an expensive task where errors are costly.
What you would love about Walabot DIY
Unlike other imaging gadgets that are currently readily available, the Walabot DIY is not bulky. You can get the capabilities of high-end stud finders and imaging systems. You get 3D imaging conveniently and easily without having to pay a hefty price for it.
On top of that, it is very light and portable. With the magnet on the casing, you can work the Walabot DIY device and your own smart device as one unit.
Everything about utilizing the Walabot DIY is very easy. You do not have to worry about circuitry, as you only need to connect it to your mobile phone using the included USB cable. All the settings and tweaks are done using the smart phone. Adjusting the device is also made easy.
Plus, you have easy-to-follow guidelines provided for you on the mobile app itself or you can view videos from the company’s site to find out how to use your Walabot DIY.
What’s more, it doesn’t utilize x-ray innovation, which makes it really safe and you can utilize it without ionizing radiation.
Simply put, this is a portable and safe device that offers you terrific 3D images that you can use for your house restoration tasks or home improvement requirements.
Pricing and Returns
If you are just a property owner looking to do light repairs on your house or just wish to play around with new gadgets for your house, the Walabot DIY begins at simply $79.99!
The other three more advanced models: the Walabot Starter Pack, Walabot Creator Pack, and the Walabot Developer Packare priced at $149.99, $149.99, and $599.99 respectively.
These designs are more expensive due to the added advance features in the models, along with the improved image quality on these models, and overall, it is a more powerful device that can do a lot more than the model.
Not happy with the performance of your Walabot or have a defective model?
That is totally okay! Walabot advertises on their site that they have a 30-day return policy! Bear in mind that returns will just be accepted if the return request was sent out within 30 days of the customer getting the item at their delivery area. Walabot can not refund third party purchases (such as from Amazon.com or B&H Photo).
Last word about the Walabot Wall Density Scanner
Walabot is a godsend to people who enjoy home remodellings and those who like to play with their home decor. It can also help when you have rodents and pests living inside your walls. You can finally see what’s behind your walls, even if you are not Superman and do not have his X-ray vision.
Walabot DIYprovides you a simple way to see through drywall or cement, and examine pipelines, studs, and wires. And you can get 3D images saved to your phone so that you could evaluate it later on.
What do all of these help you with? Wall Density Scanner
For one, you can use Walabot DIY to understand just how deep you can drill in order to prevent damaging the pipelines or cutting the wires behind your walls. You can also change and calibrate the sensing units’ sensitivity to much better fit the imaging to your particular job.
You can never go wrong with the Walabot DIY. And if you wish to take it an action even more, you can always buy the more advanced packs that the company offers. Wall Density Scanner